Sources:  Most of these citations were obtained from ResearchGate (https://www.researchgate.net/) and Academia (https://www.academia.edu/). Thank you!

​

Updated on March 14, 2024.

​

​

D. Choudhary and S. Malasri, “Machine Learning Techniques for Estimating Amount of Coolant Required for Shipping of Temperature Sensitive Products,” International Journal of Emerging Technology and Advanced Engineering, 10(10), 67-70, October 2020.

​

• P. K. Mannepalli, A. Khan, P. Chugh,s. Patka, and R. Ponmalar, "Classification of Pepper Bell into Heathy and Bacterial Spot Using Deep Learning," Proceedings of the 2023 International Conference on Communication, Security and Artificial Intelligence (ICCSAI), IEEE, November 2023.

• P. K. Dutta, U. Banerjee, B. Manna, K. Hazarika, B. Das, and S. Roy, "Nanotechnology and the Application of Information Technology for Sustainable Innovation in Agriculture," Business Intelligence and Information Technology, July 2023. 

• O. P. Singh, V. Shammugasundaram, A. Ahmad, S. R. Kabat, "Experimental Analysis on Fault Detection in Induction Machines via IoT and Machine Learning," Proceedings of the International Conference on Intelligent Computing, Communication and Information Security, July 2023.

• K. Sridhar, G. Shinde, A. Chaurasia, Aasha Rani N. R., "Data Science: Simulating and Development of Outcome Based Teaching Method, " International Conference on Artificial Intelligence and Knowledge Discovery in Concurrent Engineering, January 2023.

• A. N. Shankar, V. Jagota, N. H. Jamadon, R. Raffik, V. L. Suneetha, I. A. Samori, and L. Karnan, "An AHP-TOPSIS Approach for Optimizing the Mechanical Performance of Natural Fiber-based Green Composites," Advances in Materials Science and Engineering, Hindawi, 2022.

• G. P. Dubey and R. K. Bhujade, "Intrusion Detection System Based on Feature Reduced Back Propagation Neural Network Using Ant Colony Optimization," Cyber Technologies and Emerging Sciences, August 2022.

• G. Singh, J. P. Appadurai, V. Perumal, K. Kavita, T. C. A. Kumar, D. Prasad, A. A. J. Pazhani, and K. Umamaheswari, "Machine Learning-Based Modelling and Predictive Maintenance of Turning Operation under Cooling/Lubrication for Manufacturing Systems," Advances in Material Science and Engineering, 3(1), 1-10, July 2022.

• J. Gupta, S. Pathak, and G. Kumar, "Bare Skin Image Classification using Convolution Neural Network," International Journal of Emerging Technology and Advanced Engineering, 12(1), 2022.

• A. Chaturvedi, V. Rajpoot, M. Bansal, and H. D. Agrawal, "An Analysis of Different Machine Learning Algorithms for Image Classification," Recent Innovations in Computing, 2022.

• V. Rajpoot, R. Agrawal, A. Chaturvedi, K. Goyal, "An Empirical Study of Sentiment Analysis on Movie Review using Machine based Classification Approach," The 5th International Conference on Information Systems and Computer Networks (ISCON), 2021.

• G. P. Dubey, "Investigating the Impact of Feature Reduction Through Information Gain and Correlation on the Performance of Error Back Propagation Based IDS," International Journal of Electrical and Electronics Research, FOREX Publication, 9(3): 27-34, 2021.

• Y. Khan and S. Verma, "An Intelligent Blockchain and Software-Defined Networking-Based Evidence Collection Architecture for Cloud Environment," Scientific Programming, 2021.

​

S. Malasri, P. Rayapati, and D. Kondeti, “Predicting Corrugated Box Compression Strength Using an Artificial Neural Network,” International Journal of Advanced Packaging Technology, 4(1), 169-176, January 29, 2016.

 

• J. Gu, B. Frank, E. Lee, "A Comparative Analysis of Artificial Neural Network (ANN) Architectures for Box Compression Strength Estimation," Korean Journal of Packaging Science and Technology, December 2023.

• S. Kim, L. Horwath, E. Molina, B. Frank, S. Johnson, A. Johnson, "Predicting the effect of pallet overhang on the box compression strength," Packaging Technology and Science, July 2023.

​

S. Malasri, A. Pourhashemi, R. Moats, A. Herve, J. Ferris, A. Ray, and R. Brown, “Effect of Temperature on Drinking Water Bottles,” International Journal of Advanced Packaging Technology, Vol. 3, No. 1, pp 147-157, May 18, 2015.

​

• B. Jain, A. K. Singh, and A. B. H. Susan, "The World Around Bottled Water," Bottled and Packaged Water, Vol. 4, The Science of Beverage, 39-61, 2019.

​

B. Aloumi, W. Alnashwan, S. Malasri, A. Othmani, M. Kist, N. Sampson, S. Polania, Y. Sanchez-Luna, M. Johnson, and R. Fotso, “Experimental Verification of McKee Formula,” International Journal of Advanced Packaging Technology, Vol. 3, No. 1, pp 129-137, February 13, 2015.

​

•  K. R. Ramdass, M. Netshifhefhe, B. Mnewango, 'Determining the Root Causes of Boxes Stacking Strength Failure and Find Possible Solutions," Proceedings of the International Conference on Industrial Engineering and Operations Management, Manila, Philippines, March 7-9, 2023.

​

S. Malasri, P. Tiapradit, S. Russell, P. Poonpurmsiri, c. Tarkarnviroj, A. Pourhashemi, R. Moats, and B. Hudson, “Insulation Effectiveness of Rice Hull,” International Journal of Advanced Packaging Technology, 3(1), 158-168, 2015.

​

• Z. McCaffrey, A. Cal, L. Torres, B. Chiou, D. Wood, T. Williams, and W. Orts, "Polyhydroxybutyrate Rice Hull and Torrefied Rice Hull Biocomposites." Polymers, 14, 3882, September 2022.

• M. Lotfi, C. Bayoudh, A. Majdoub, and M. Mars, "An Optimized Protocol for In Vitro Propagation of Pyrus Communis and Pyrus Syriaca Using Aprical-bud Microcutting," Journal of Horticulture and Postharvest Research, 3(1), 1-10, 2020.

​​

D. Choudhary, S. Malasri, M. Harvey, and A. Smith, “Time-Frequency Analysis of Shock and Vibration Measurements Using Wavelet Transforms,” International Journal of Advanced Packaging Technology, Vol. 2, No. 1, pp 60 - 69, January   21, 2014.

​

• D. Choudhary, "Synchrosqueezing Transform for High Resolution Time-Frequency Analysis of Shock and Vibration," International Journal of Advanced Packaging Technology, 4(1), 2016.

​

S. Malasri, R. Stevens, A. Othmani, M. Harvey, I. Griffith, D. Guerrero, M. Johnson, M. Kist, C. Nguyen, S. Polania, A. Qureshi, and Y. Sanchez-Luna, “Rice Hulls as a Cushioning Material,” International Journal of Advanced Packaging Technology, Vol. 2, No. 1, pp 112 - 118,  October 14, 2014.  

​

• Citations of HortFlora Research Spectrum, 3(4), December 2014.

​

W. Alnashwan, B. Aloumi, S. Malasri, M. Kist, A. Othmani, R. Fotso, M. Johnson, S. Polania, and Y. Sanchez-Luna, “Shock Absorption of Crumb Rubber and Coconut Fiber,” International Journal of Advanced Packaging Technology, Vol. 2, No. 1, pp 119 - 128, December 27, 2014.​

 

• S. Anandan, Lim, Tan, V. Anggraini, M. E. Raghunandan, "Numerical and Experimental Investigation of Oil Palm Shell Reinforced Rubber Composite," Polymers, 12(2), 2020.

​

S. Malasri, A. Pourhashemi, R. Brown, M. Harvey, R. Moats, K. Godwin, P. Aung, and J. Laney, “Effect of Temperature on Static and Impact Properties of New Softwood Pallets,” International Journal of Advanced Packaging Technology, Vol. 1, Issue 1, pp 30 -  39, November 2, 2013

​

• N. Almasarwah, E. Abdellall, G. Suer, G. Egilmez, M. Singh, and S. Ramadan, "Pallet Loading Optimization Considering Storage Time and Relative Humidity," Journal of Industrial Engineering and Management, 16(2), 453-471, 2023.

• R. M. Hussein, B. Sen, M. Koyun, and A. R. Demirkiran, "Effects of Storage Temperature and Sun Light Exposure on Some Bottled Water Marketed in Kirkuk City, North Iraq. International Journal of Engineering Technologies and Management Research, 6(7), July 2019.

• B. Jain, A. K. Singh, and M. A. B. H. Susan, The World Around Bottled Water, Woodhead Publishing, 2019.

• M. Singh, N. E. Almasarwah, and G. Suer, "A Two-Phase Algorithm to Solve a 3-Dimensional Pallet Loading Problem," Procedia Manufacturing, 39, 1474-1481, 2019.

​

S. Malasri, “Plastic Tote Distribution,” International Journal of Advanced Packaging Technology, Vol. 1, Issue 1, pp 40 -  52, December 5, 2013

​

• J. Wu, C. S. Pan, M. Ronaghi, B. M. Wimer, U. Reischi, "Application of polyethylene air-bubble cushions to improve the shock absorption performance of Type I construction helmets for repeated impacts," Bio-medical Materials and Engineering, 32(6): 1-14, 2020.

• J. Wu, C. S. Pan, M. Ronaghi, B. M. Wimer, U. Reischi, "Application of air-bubble cushioning to improve the shock absorption performance of type I industrial helmets," Engineering Failure Analysis, 117(11), 2020.

• I. Stančić, J. Jukić, J. Musić, "Prototype of Energy Efficient Device for Measurement and Analysis of Impacts During Small Parcel Shipping," Journal of Testing and Evaluation, ASTM International, 47(2), 1259 - 1270, February 2019.

​​

S. Malasri, A. Pourhashemi, P. Aung, M. Harvey, and R. Moats, "Water Absorption of Wooden Pallets," International Journal of Applied Science and Technology, Vol. 2, No. 9, pp 1 - 10, November 2012.

​

• E. Zacchei, A. Tadeu, J. Almeida, M. Esteves, I. Santos, S. Silva, "Design of New Modular Metal Pallets: Experimental Validation and Life Cycle Analysis," Materials & Design, 214(2), 2022.

​

S. Malasri, E. Thorsteinsdottir, and J. Malasri, "Concrete Strength Prediction Using a Neural Network," Proceedings of the MAESC 2006 Conference, March 2006.

​

• D. Zhenhua, Modeling the Properties of Concrete Prepared with Recycled Aggregates Derived from Different Sources. PhD Thesis. The Hong Kong Polytechnic University. August 2014.

• M. Miri, H. H. Nejad, and M. Jafari, "Experimental Investigation of Mechanical Properties of Concrete Containing Nano-Wollastonite and its Modeling by GMDH Type Neural Networks," Amirkabir Journal of Science & Research, Vol. 46, No. 2, Winter 2014, pp. 143- 156, 2014. (In Arabic)

​

S. Malasri, J. Malasri, and K. Malasri, “Automation of Engineering Design Aids Using Neural Networks,” Proceedings of the MAESC 2005 Conference, May 2005.

​

• I. Stamova, T. Stamov, and N. Simeonova, "Impulsive Control on Global Exponential Stability for Cellular Neural Networks with Supremums," Journal of Vibration and Control, 19(4), 483-490, 2013.

• T. Stamov, "Stability Analysis of Neural Network Models in Engineering Design," International Journal of Engineering and Advanced Technology, 9(3), 1662-1666, 2020.

​

K. Madhavan and Siripong Malasri, “Professional Registration of Engineering Faculty,” Journal of Professional Issues in Engineering Education and Practice, ASCE, 129(3), 122-124, July 2003.

​

• A. R. Bielefeldt, "Professional Licensure among Civil Engineering Faculty and Related Educational Requirements," Journal of Professional Issues in Engineering Education and Practice, ASCE, 145(3), 2019.

• B. Barry, Y. Mehta, and S. St. Clair, "Professional Engineering Licensure and Professional Experience Among Civil Engineering Faculty: A Multi Institutional Comparison," Annual Conference & Exposition, ASEE, Austin, Texas, June 14-17, 2009.

• J. Rojter, Anything But Engineering: A View of Engineering as an Attractive Course of Study, January 2009.

• R. Harichandran, "AC 2007-1456: Faculty Hiring Trends at Small to Medium-Sized Research-Intensive CEE Departments and Balancing the Needs of Research and Practice," American Society for Engineering Education, 2007.

• A. T. Yeung, "Reappraisal of University-Level Engineering Education," Journal of Professional Issues in Engineering Education and Practice, 132(2), April 2006.

 

S. Malasri, "Preliminary Survey of Teaching Engineering Ethics," Proceedings of the MAESC 2002 Conference, May 2002.

​

• R. F. Clancy, "The Ethical Education and Perspectives of Chinese Engineering Students: A Preliminary Investigation and Recommendations." Science and Engineering Ethics, Springer, 2019.

​

Siripong Malasri, "Book Review: The McGraw-Hill Handbook of Distance Learning," Journal of Professional Issues in Engineering Education and Practice, American Society of Civil Engineers/National Society of Professional Engineers, Vol. 126, No. 1, pp. 41-42, January 2000.

​

• E. Pigliapoco and A. Bogliolo, "The Effects of Psychological Sense of Community in Online and Face-to-Face Academic Courses," International Journal of Emerging Technologies in Learning, 3(4), 60-69, November 2008.

• E. H. Chaney, J. D. Chaney, J. M. Eddy, M. L. Stellefson,  "Making the Case for Distance Education in the Health Education and Health Promotion Profession," Distance Education in the Health Education and Heath Promotion Profession, 11, 5-18, 2008. 

​

S. Malasri, "Optimization Using Genetic Algorithms," Proceedings of the Memphis Area Engineering Societies Conference (MAESC '99), Memphis, TN, May 1999.

​​

• W. Liu, S. Liu, D. Gao, R. Jiao, Y. Huang, and X. Duan, "LLM Based Public Message Refinedly Grading Method," Proceedings of the 3rd International Conference on Digital Society and Intelligent Systems, November 2023.

• T. H. Nguyen, V. D. Le, X. H. Vu, and D. K. Nguyen, "Reliability-based Design Optimization of Steel-Concrete Composite Beams Using Genetic Algorithms and Monte Carlo Simulation," Engineering, Technology & Applied Science Research, 12(6), 9766-9770, 2022.

• M. Alshammari, M. Mezher, and K. Al-utaibi, "Automatic Test Data Generation Using Genetic Algorithm for Python Programs," The 2nd International Conference on Computing and Information Technology (ICCIT), 2021.

• C. M. Tsai, Y. C. Fang, and Z. H. Chen, "A Study of Optical Design and Optimization Applied to Lens Module of Laser Beam Shaping of Advanced Modern Optical Device," SPIE  Optical Engineering, September 2011.

• A. A. Altun and M. A. Sahman, "Cost Optimization of Mixed Feeds with the Particle Swarm Optimization Method," Neural Computing and Applications, 22(1), 2011.

• D. Bai, P. J. Yang, L. X. Song, "Optimal Design Method of Looped Water Distribution Network," Systems Engineering - Theory & Practice, 27(7), 137-143, July 2007.

• M. A. Guzman and A. Delgado, "Optimising a Shaft's Geometry by Applying Genetic Algorithms," Ingenieria e Investigación, 25(2), 15-23, August 2005.

• E. Shokir, M. K. Emera, S. M. Eid, A. W. Wally, "A New Optimization Model for 3d Well Design," Oil & Gas Science and Technology, 59(3), 255-266, May 2004.

​

F. Terry and S. Malasri, "Introducing Engineering to High-School Students," IEEE Mid-South Annual Engineering and Science Conference Proceedings, Memphis, TN, 1999.​

 

•  V. Devaraj, A Hands-On Manufacturing Curriculum for High School Students, Master's Thesis, The University of Texas at Austin, December 2015.

• H. W. Fox and M. R. Overton, "Using Robotics to Enhance Outreach Programs for High School Students," Cleveland State University, January 2006. 

​

L. Y. Lin and S. Malasri, "The Use of Genetic Algorithm in Solid Waste Collection Analysis," Journal of Solid Waste Technology and Management, 25(1), 27-32, 1998.

​

• T. Cheng, H. Wu, Y. Ke, and C. Feng, "Applying Genetic Algorithms on the Computer Simulation for Improving Construction Productivity," Chaoyang University, Taiwan., 2002.

​

S. Malasri, J. R. Martin, and R. A. Medina, "Solving Mathematical Programming Problems Using Genetic Algorithms," Proceedings of the Third Congress on Computing in Civil Engineering, ASCE, pp 233-239, 1996.

​

• A. Baykasoglu, Multiple objective decision support framework for configuring, loading and reconfiguring manufacturing cells. PhD Thesis, University of Nottingham. 1999.

​

H. T. Kung, L. Y. Lin, and S. Malasri, "Use of Artificial Neural Networks in Precipitation Forecasting. Regional Hydrological Response to Climate Change," Jones, J.A.A., Liu, C., Woo, M.K., Kung, H.T., Eds.; The GeoJournal Library; Springer: Dordrecht, The Netherlands, 38, 1996.

​

• C. Li, L. Zhu, Z. He, H. Gao, Y. Yang, D. Yao, and Z. Qu, "Runoff Prediction Method Based on Adaptive Elman Neural Network," Water, MDPI, May 28, 2019.

• B. P. Parida, D. B. Moalafhi, and P. Kenabatho, "Forecasting Runoff Coefficients Using ANN for Water Resources Management: The Case of Notwane Catchment in Eastern Botswana," Physics and Chemistry of the Earth Parts A/B/C, 31(15), December 2006.

​

S. Malasri, J. R. Martin, and L. Y. Lin, "Hands-on Software for Teaching Genetic Algorithm," Computers in Education Journal, ASEE, pp. 42-47, Jan-Mar, 1996.

​

• R. L. Haupt and S. E. Haupt, Practical Genetic Algorithms, 2nd Edition, Wiley, 2004.

​

S. Malasri, D.A. Halijan, and M.L. Keough, "Concrete Beam Design Optimization with Genetic Algorithms," Proceedings of the Arkansas Academy of Science, Vol. 48, pp 111-115, 1994.

​

• E. Chagoyen, "Biogeography-Based Optimization of RC structures including static soil-structure interaction," Structural Engineering and Mechanics, 2021.

• T. M. Saeed Alrudaini, "Optimization of Concrete Beams Reinforced with GFRP Bars." Journal of Soft Computing in Civil Engineering, 6(3), 18-38, Pouyan Press, 2022.

​

S. Malasri, J. C. Olabe, and M. A. Olabe, "A Prototype of the Uniform Building Code Using Hypertext," Electronic Computation (eds. O. Ural and T. Wang), American Society of Civil Engineers, pp 36 43, 1991.

​

• S. J. Fenves, J. H. Garrett, H. Kiliccote, K. H. Law, and K. A. Reed, "Computer Representations of Design Standards and Building Codes: U.S. Perspective," International Journal of Construction Information Technology, 3(1), 13-34, 1995.

​

S. Malasri and S. Maldonado, "Concrete Mix Designer," State of the Art Computer Applications in Concrete Technology (ed. F. E. Fagundo), ACI, pp 33-42, 1989.

​

• H. M. Abdelsalam, M. N. Borhan, R. A. Rahmat, "Expert System for Green Transportation System: An Overview." Journal of Theoretical and Applied Information Technology, 96(7), 2018.

​

S. Malasri and S. Maldonado, "An Expert System for Teaching Concrete Mix Design," Computers & Education Journal, Pergamon Press, 13(1),  69-76, 1989.

​

• A. A Mohammed, K. Ambak, A. M. Mosa, and D. Syamsunur, "Expert System in Engineering Transportation: A Reivew." Journal of Engineering Science and Technology, 14(1), 229-252, 2019.

• A. M. Mosa, N. N. Ismail, N. I. Md Yusoff, M. Mubaraki, N. A. Memon M. R. Taha, M. S. Hainin, "An Expert System to Remedy Concrete Imperfections and Their Effects on Rigid Pavement," Jurnal Teknologi, 76(14), 105-119, 2015.

​

S. Malasri, "Soil Classification: An ESIE Approach," Computers in Education, ASEE, 8, 43-47, 1988.

​

• S. Hashemi, The design of a relational database on the geotechnical properties of Northern England Glacial Till, Doctoral Dissertation, Newcastle University, October 2002.

​​

S. Malasri and S. Maldonado, "Concrete Mix Designer. Computer Application in Concrete Technology, ACI, 111-03,33-42, 1988.

​

• A. T. David, Sistema Pericial para o Estudo de Composicao de BEtoes, Master Thesis, Instituto Superior de Engenharia do Porto, 2012.

​

S. Malasri, "Student Advising Using Spreadsheet Program." International Journal of Applied Engineering Education, 3(6), 559-562, 1987.

​

• A. Chehab, "Spreadsheet applications in electrical engineering: A review," Int. J. Engng Ed., 20(6), 902-908, 2004.

 

​